Wire clips are used to secure cargo and pallets by connecting both ends of the strap using hand tools (tensioners). They enable safe and reliable fastening, even with varying loads during transport. Using wire staples achieves flexible, economical, and efficient packaging in numerous industrial sectors.
Metal fasteners are used for mechanically joining steel strapping when packaging heavy and bulky loads. They are intended for use with steel strap tools (manual or pneumatic), with or without tensioning and cutting in a single step.
Wire anchors for packaging
Wire clips are used to secure cargo and pallets by connecting both ends of the strap using hand tools (tensioners). They enable safe and reliable fastening, even with varying loads during transport. Using wire staples achieves flexible, economical, and efficient packaging in numerous industrial sectors.
Characteristics and Application
Translate from:
Available in two surface protection options:
Phosphated – for better receptivity and additional protection against corrosion
Zink-plated – for long-lasting resistance to external influences
Fosfatirane – za bolju prijemčivost i dodatnu zaštitu od korozije
Pocinkovane – za dugotrajnu otpornost na spoljne uticaje
The robust construction allows for multiple uses in some applications.
Easy to apply and safe to use
They are most commonly used with textile tapes – Hot Melt and woven.
They are also suitable for use with PP and PET straps in less demanding applications.
Phosphated wire staples for packaging
They have a rougher surface with a higher coefficient of friction, which allows for a strong and secure bond of the tape, even under heavier loads.
Features
Surface treatment: phosphating – increases friction between the buckle and the strap
They allow for safe tightening without slipping
Ideal for hot melt and woven tape, as well as some types of PET tape
Advantages
Suitable for heavy-duty and demanding applications
They provide better mechanical grip for the belt
Increased safety when packaging products with greater mass or sharp edges
Designed with a smooth surface and low friction, allowing for easy tightening of the strap while preserving the integrity of the material. glatkom površinom i niskim trenjem, što omogućava lako zatezanje trake uz očuvanje integriteta materijala.
Features
Surface protection: zinc – provides corrosion resistance and extends lifespan
The low friction coefficient allows for efficient tightening with hand tools omogućava efikasno zatezanje pomoću ručnih alata
Suitable for use with Hot Melt textile tapes, where elasticity and flexible bonding are required Hot Melt tekstilnim trakama, gde je potrebna elastičnost i fleksibilno vezivanje
Note
These buckles are not recommended for strapping: Standard PET straps, due to the lower friction which can cause the strap to slip Woven straps, where greater stability and friction are desired
We produce high-quality metal fasteners designed for manual strapping of plastic straps (PP and PET), in combination with manual packaging tools. ručno vezivanje plastičnih traka (PP i PET), u kombinaciji sa ručnim alatima za pakovanje.
Features and Benefits
The textured (rough) surface allows for better grip and secure holding of the tape without slipping omogućava bolju prijemčivost i sigurno držanje trake bez proklizavanja
High-quality and durable joint, without tearing or pulling the tape during handling or transport. They are made of cold-rolled or galvanized sheet metal with controlled composition and hardness, bez cepanja ili izvlačenja trake tokom manipulacije ili transportaIzrađene su od hladnovaljanog ili pocinkovanog lima kontrolisanog sastava i tvrdoće
Precise bending angles reduce wear and extend the lifespan of hand tools. They are suitable for a wide range of hand applications in industrial packaging smanjuju habanje i produžavaju vek trajanja ručnih alataPogodne su za širok spektar ručnih aplikacija u industrijskom pakovanju
Used for mechanically joining steel strapping when packaging heavy and bulky loads. They are intended for use with steel strap tools (manual or pneumatic), with or without tensioning and cutting in a single step. mehaničko spajanje čelične trake prilikom pakovanja teških i glomaznih tereta. Namenjene su za upotrebu sa alatima za čeličnu traku (ručnim ili pneumatskim), uz ili bez zatezanja i sečenja u jednom koraku.
Features
Made from high-quality steel for maximum strength and resistance to deformation visokokvalitetnog čelika za maksimalnu čvrstoću i otpornost na deformaciju
Available in various dimensions and thicknesses, depending on the width and type of tape (16 mm, 19 mm, 25 mm, 32 mm) dimenzijama i debljinama, u zavisnosti od širine i tipa trake (16 mm, 19 mm, 25 mm, 32 mm)
Surface protection: without corrosive protection or galvanized, depending on requirements and storage conditions pocinkovane, u zavisnosti od zahteva i uslova skladištenja
Compatible with blade and tension closing tools, as well as non-cutting closing tools (so-called over-seal tools) zatvaranje sa sečivom i natezanjem, kao i sa zatvaranjem bez sečenja (tzv. over-seal alatima)
Advantages
They provide a strong and reliable connection, resistant to vibrations and movement during transport čvrst i pouzdan spoj, otporan na vibracije i pomeranja tokom transporta
Suitable for heavy industrial applications, such as steel mills, the timber industry, building materials, stone, pipes, and similar teške industrijske primene, poput čeličana, drvne industrije, građevinskih materijala, kamena, cevi i sličnog
Plastic corners 40 x 40 mm Zaštita ivica pri vezivanju trakom
Made from high-quality HDPE material, which provides exceptional resistance to pressure, impact, and wear. These corner protectors serve as effective edge protection when tightening PP or PET strapping, preventing damage to packaging, cardboard boxes, as well as wooden or metal surfaces. Thanks to their strength and construction, they distribute the tension force evenly, thereby increasing the safety of goods during palletizing, transportation, and storage.
